Desire to use 192.168.10.1 to configure your Wavlink range extender? If so, after reading this blog, you will be able to set up your Wavlink wifi extender in a matter of minutes. To complete the Wavlink wifi extender setup, use 192.168.10.1 as the default gateway. Wavlink brand extenders significantly improve wireless network coverage and overall performance. Wavlink Wifi extender configuration works best for the 2.4-5GHz WiFi band and increases interference-reduction to 300Mbps. Because of the Wavlink extender's small size, you can take it with you wherever you go.

Follow these steps to setup the Wavlink extender via 192.168.10.1:

  • Connect your Extender to the power socket.
  • Turn on the extender in the repeating mode.
  • Start the wifi-capable wireless device, then sign in to the specified extender network.
  • To establish the connection, a password is required.
  • In the Search bar type 192.168.10.1
  • You've arrived at the login page. To log in, type your password.
  •  Read carefully and follow the steps that are given to you to complete your ap.setup.

How to Connect to Wavlink Extender Using WPS?

We have two different processes to access our Wavlink Extender WPS and manual process.

WPS is the simplest way to set your wavlink Extender.In this process you only have to press the WPS button. 

Let’s see how to step your Wavlink Extender Setup using  WPS:

  • Plug in your Wavlink Extender to the socket.
  • Locate your Extender near the Router.
  • press the WPS button on your Extender and router too.
  • Now wait for the green light on your Extender.
  •  If the WPS light turns to green.It means the connection between the Router and Extender is good. 
  • Now plug out your Extender and place where you want to place it.
  • And connect with your devices.

This is how you set up the Wavlink range extender. If you still have issues, please contact us using our toll-free number.

How to Setup Wavlink Extender via manual process?

If you are unable to connect with WPS, don't worry, we have a manual process available.

Using the default web address or IP address, you can connect your Wavlink Extender during this process.

Follow the steps below to configure your Wavlink Extender in about 2-3 minutes.

  • Connect your  power source to your Wavlink range extender.
  • Navigate to your laptop or Smartphone wireless settings once you see a power LED light.
  • Now Connect your device to the network of the WiFi extender.
  • Go to any web browser and enter the IP address into the address bar.
  • You've arrived at the login page for the range extender. 
  • Follow the onscreen instructions to connect your booster to your existing modem or router.

If you are still unable to connect your booster after following the procedures outlined above, please see the list below:

  • Please reset the booster to factory default if the repeater has two or more LED lights.
  • Press and hold the reset button for 10-15 seconds to properly reset the device.
  • Use the web URL wifi.wavlink.com to view the installation page,if 192.168.10.1 does not work.
  • The default IP address will function if you are connected to the extender network. As a result, make sure you're connected to the repeater network.
  • You will not be able to access the 192.168.10.1 IP address once you have installed your booster.

If you have any issues with your Wavlink wifi extender, please contact our experts for free assistance.