If you want to keep your roof in good condition for a long time, then you should inspect it at least twice a year to find out if there are any problems on it. However, we recommend hiring a reliable roofer in your location to get your roof repaired or replaced.
If you are looking for an experienced roofer in Baldwin Park, then you should contact Murphy Roofing Services. Let us understand the mistakes that you need to avoid in a roofing project.
Don’t avoid installing gutter guards
Gutter guards can create a barrier in your gutters thereby preventing the dust, debris, and dry leaves entering the gutters. These particles can clog your gutters and prevent the water from flowing smoothly. So, you should not avoid installing gutter guards if you want to avoid standing water issues on your roof.
Don’t install new shingles over the existing ones
Sometimes, your roofer makes the mistakes of installing new shingles over the existing ones, which they should avoid. Remember, the building codes do not allow more than two layers of shingles on a roof. If you have already installed two layers of shingles, then you should not put one more layer on it.
The building code will not allow you to do so; as a consequence, you have to remove your new roof to get rid of legal hassles. Eventually, you will have to spend more on a roof installation project.
Moreover, you will end up putting heavy load on your roof if you install multiple layers of shingles on your roof. This might collapse your roof and cause severe damage to your home. So, first, remove the old shingles and then install new ones.
Do not avoid the leaks
Water leakage can give rise to many roofing issues along with poor indoor atmosphere and a few health issues. The water enters your home to cause more damage to it. Moreover, it can damage your ceiling and electrical wiring to further cause electrical hazards inside your home.
So, your roofer needs to fix the leaks on your roof to ensure the safety of your house and your loved ones. Moreover, the water can damage your attic insulation thereby paving the way to germ buildup. This can also cause health issues in your home.
Don’t use Staples
Often, inexperienced roofers use staples to fasten the shingles instead of nails, which is one of the most common mistakes in a roofing project. This cannot provide the desired support to your roof. As a result, your roof might blow off during severe storms. The length of the staples is not adequate to secure your shingles properly to the roof deck.
Don’t ignore the Underlayment
Underlayment is necessary for your roof as it protects your roof from water damage. It creates a barrier between the roof and the shingles and thus protects your house from leakage issues.
Often, excess moisture on your roof causes rotting and mold development in your roof. So, you should avoid such contractors who suggest not installing underlayment on your roof.
Don’t reuse Old roofing materials
If you use old materials such as flashing, vents, and drip edges, then it might damage your roof in the long run. You might save a few bucks at the time of roof installation, but in the long run, your roof will be damaged.
So, avoid hiring a roofer who suggests you using the old material instead of investing in new ones.
Conclusion
The roof helps protect your house from heat, snow, and rain. Moreover, you can ensure the safety of your valuables and protect them from any damage caused due to water, snow, dust, and debris if you take good care of your roof.
Hence, you need to inspect your roof regularly so that you can figure out the issues on your roof and get them addressed before you face any water leakage or other roofing problems.
