Tips and Tools for Changing Your Frigidaire Refrigerator Parts

If your Frigidaire refrigerator is not cooling properly, you may need to replace the evaporator. The evaporator is responsible for cooling the air inside the refrigerator by absorbing heat from it. Over time, the evaporator can become damaged or clogged with ice, which can lead to a malfunctioning fridge. In this article, we will provide you with a step-by-step guide on how to replace the evaporator on your Frigidaire refrigerator, along with some tips and tools you'll need to get the job done.

Tools You'll Need

Before you start, you'll need to gather a few tools to help you with the task. Here's a list of what you'll need:

  • Screwdriver
  • Pliers
  • Wrench
  • Drill
  • Refrigerant recovery machine
  • New evaporator

Step-by-Step Guide

Now that you have your tools ready, it's time to get started. Follow these steps to replace the evaporator on your Frigidaire refrigerator:

Step 1: Turn Off Power to the Refrigerator

The first thing you need to do is turn off the power to the refrigerator. This can be done by unplugging the unit from the wall or turning off the circuit breaker that powers it.

Step 2: Remove the Shelves and Drawers

Remove all the shelves and drawers from inside the refrigerator to give you more room to work.

Step 3: Remove the Back Panel

The evaporator is located behind the back panel of the refrigerator. To access it, you need to remove the back panel. This is usually held in place with screws or clips. Use a screwdriver or pliers to remove them, and then gently pull the panel away from the refrigerator.

Step 4: Disconnect the Evaporator

The evaporator is connected to the refrigerator with several tubes and wires. Use a wrench or pliers to disconnect them carefully, making sure not to damage any of the frigidaire refrigerator parts. Take note of where each tube and wire is connected, so you can easily reconnect them later.

Step 5: Remove the Evaporator

Once the evaporator is disconnected, you can remove it from the refrigerator. Depending on your model, it may be held in place with screws or clips. Use a screwdriver or pliers to remove them and gently pull the evaporator away from the refrigerator.

Step 6: Install the New Evaporator

Take the new evaporator and position it in the same location as the old one. Secure it in place with screws or clips.

Step 7: Reconnect the Evaporator

Reconnect all the tubes and wires to the new evaporator, following the notes you made earlier.

Step 8: Replace the Back Panel

Replace the back panel of the refrigerator and secure it with screws or clips.

Step 9: Reinstall the Shelves and Drawers

Put back all the shelves and drawers inside the refrigerator.

Step 10: Turn On the Power

Finally, turn on the power to the refrigerator by plugging it back in or turning on the circuit breaker.

Conclusion

In conclusion, replacing the evaporator on a Frigidaire refrigerator is a relatively straightforward process if you have the right tools and follow the steps outlined above. If you're not comfortable doing it yourself, consider hiring a professional. Remember to always handle frigidaire refrigerator parts with care, and take note of how everything is connected before disconnecting it to avoid any issues when reconnecting.