Rockspace is a brand that specializes in providing networking and connectivity solutions, including Wi-Fi extenders. A Wi-Fi extender, also known as a range extender or repeater, is a device that amplifies and extends the coverage of your existing Wi-Fi network, allowing you to eliminate dead zones and improve signal strength in your home or office.

Rockspace Extender Manual Setup

These are the quickest steps to follow when installing a Rockspace Wi-Fi extender.:

  • Plug in the extender and wait for the power indicator light to stabilize.
  • Connect your computer or mobile device to the extender's Wi-Fi network (e.g., "YourNetworkName_EXT").
  • Open a web browser and enter the default IP address of the extender.
  • Log in using the default username and password (often "admin" for both).
  • Choose your current Wi-Fi network and type in the password.
  • Save the settings and wait for the extender to establish a connection.
  • Test the extended network by connecting your devices to the new Wi-Fi network broadcasted by the extender.

Please note that these steps are a simplified version, and the actual setup process may vary depending on your specific Rockspace extender model. It's always recommended to consult the installation guide or user manual provided with your device for detailed instructions.

Rockspace Extender Setup: WPS Method 

Here is a condensed version of the steps for  Rockspace Wi-Fi extender setup  using the WPS button:

  1. Plug in the Rockspace extender and ensure it's powered on.
  2. Locate the WPS button on your Wi-Fi router and press it.
  3. Press the WPS button on your Rockspace extender in 2 minutes.
  4. Wait for the WPS LED on the extender to indicate a successful connection.
  5. Once the connection is established, the extender is ready to use.

Please note that the WPS setup method may not be available on all Rockspace extender models. If your extender does not have a WPS button or you encounter any issues during the setup process, it's recommended to consult the installation guide or user manual provided with your specific model for alternative setup methods.

Rockspace Extender Setup: Firmware Update

Here is a rephrased version of the steps to upgrade the firmware on your Rockspace extender using re.rockspace.com:

  • Ensure that your Rockspace extender is connected to your existing Wi-Fi network and has internet access.
  • Open a web browser on a computer or mobile device connected to the same network.
  • In the address bar, enter "re.rockspace.com" as the URL.
  • The Rockspace extender management page will open in your web browser.
  • Look for the firmware upgrade section or option within the management interface.
  • Check for any available firmware updates for your Rockspace extender.
  • If an update is available, download the latest firmware file provided by Rockspace.
  • On the management page, locate the firmware upgrade option and choose the downloaded firmware file.
  • Initiate the firmware upgrade process and wait for it to complete.
  • Avoid interrupting the power supply or disconnecting the extender during the firmware upgrade.
  • Once the upgrade is finished, the Rockspace extender will reboot.
  • Verify that the firmware upgrade was successful and ensure that your extender is functioning correctly.

Remember to follow any specific instructions provided by Rockspace for firmware upgrades, as the exact steps may vary slightly depending on your extender model and firmware version.