Welcome to the world of greater connectivity with the Victony AC1200 Extender Setup ! With our cutting-edge extender, you can quickly improve the speed and range of your wireless network. The AC1200 Extender will enhance your home or workplace networking experience. Our solution can assist you if you are experiencing dead areas, bad connections, or insufficient coverage.

Manual Method: Setting up Victony AC1200 Extender 

steps by step guide on Victony AC1200 extender setup:

  1. Connect the extender to a power source.
  2. Wait for the power LED to turn solid blue.
  3. Find the WPS button on both the extender and the extender.
  4. Press and hold the WPS button on the extender for about 2 seconds.
  5. Within 2 minutes, press and hold the WPS button on the extender for about 2 seconds.
  6. The LED lights on the extender will start blinking. This means that the extender is connecting to the extender.
  7. Once the LED lights on the extender turn solid blue, the extender is successfully connected to the extender.

You've successfully set up your Victony AC1200 Wi-Fi extender manually.

Keep in mind that these instructions are general and may vary slightly based on the specific model and firmware version of your extender. Always refer to the user manual provided by Victony for precise instructions tailored to your device.

How to Configure Your Victony AC1200 Extender using WPS ?

If your extender does not support WPS, you can also set up the extender using the web browser. Here are the steps:

  1. Connect your PC to the WiFi network of the extender.
  2. Open a web browser and type the IP address of the extender in the address bar. The default IP address is 192.168.10.1.
  3. Enter the username and password for the extender. By default, both the username and password are set to "admin".
  4. Select the "Repeater" mode.
  5. Enter the SSID and password for your WiFi network.
  6. Click on the "Connect" button.

That WPS is a convenient setup method, but it might not be as secure as other methods. If security is a concern, consider using the manual setup method and setting up the extender through its web-based interface.

Factory Resetting the Victony AC1200 Extender 

To factory reset your Victony AC1200 extender, you can follow these general steps

  • On your Victony AC1200 Extender, locate the reset button.
  • Find that the extender is turned on and connected to an electrical outlet.
  • Using a tiny, pointed item such as a paperclip, press and hold the reset button for around 10 seconds.
  • Release the reset button after holding it.
  • The extender will reboot and return to its default settings.
  • After the reset, you must reset the extender, including connecting to your WiFi network and modifying any settings.

Note that a factory reset will erase all of the settings on the extender, including the WiFi network name and password. You will have to reinstall the extender from scratch.

How to Update the firmware on the Victony AC1200 extender?

To update the firmware on your Victony AC1200 extender, you can follow these steps:

  1. Connect your PC to the WiFi network of the extender.
  2. Open a web browser and type the IP address of the extender in the address bar. The default IP address is 192.168.10.1.
  3. Enter the username and password for the extender.Both the username and password are set to "admin" by default.
  4. Click on the "Management" tab.
  5. Click the "Firmware Update" button.
  6. Click on the "Check for Updates" button.
  7. If there is a newer firmware available, click on the "Download and Install" button.
  8. The extender will now download and install the new firmware.
  9. Once the firmware update is complete, the extender will reboot.

Benefits of updating the firmware

Here are some of the benefits of updating the firmware on your Victony AC1200 extender:

  • Fix bugs: Firmware updates can fix bugs that may be causing problems with the extender.
  • Improve performance: Firmware updates can improve the performance of the extender, making it faster and more reliable.
  • Add new features: Firmware updates can add new features to the extender, such as support for new WiFi standards or security features.
Troubleshooting Tips:

Some troubleshooting tips for Victony AC1200 Extender Setup:

  • The first thing you should do is make sure that the extender is properly connected to the power outlet. Check the cable to make sure it is properly plugged in.
  • The LED lights on the extender can give you an indication of its status. If the LED lights are not on, then the extender is not properly connected.
  • If your extender supports WPS, you can try setting up the extender using the WPS button. This is a quick and easy way to connect the extender to the extender.
  • If your extender does not support WPS, you can try setting up the extender using the web browser. This is a more complex process, but it can be done if you follow the instructions carefully.
  • The extender should be placed in a central location between your extender and the areas where you need better WiFi coverage. Avoid placing the extender near metal objects or appliances that can interfere with the signal.
  • Sometimes, a simple restart can fix the problem. Unplug the extender and the extender from the power outlets and wait for a few seconds. Then, plug them back in and see if that fixes the problem.
  • The firmware on the extender may be outdated. Firmware updates can help to fix issues and enhance performance.

  • If you have tried everything else and you are still having problems, you can reset the extender to factory defaults. This will erase all of the settings on the extender, but it may fix the problem.

If you are still having problems after following these tips, you can contact the manufacturer of the extender for further assistance.

You can also check the Victony website for troubleshooting tips and FAQs.

I hope these tips help you troubleshoot your Victony AC1200 extender setup problems.